Vinal floor installation

Vinyl sheet can be installed anywhere in the house, so long as it's a flat, level surface. We do not recommend installing on stairs. Your product's instructions indicate situations where one type of installation is preferred over another, for example, in bathrooms, rooms with floor drains or around cabinets. Don't forget to account for things like removal and disposal of your old floor, subfloor repairs, additional tools and materials, and even the cost of moving furniture when budgeting for your project.

The bulkiness and weight of the sheet roll combined with the challenge of cutting it perfectly to size, can make installing vinyl flooring more difficult than you might think. However, if you are an advanced DIYer who's up for a challenge, or you already know how to install vinyl flooring, you may feel confident taking on the installation yourself.

If you are beginner DIYer, or just want to save time and effort, we highly recommend hiring a Professional. You'll have the peace of mind that your flooring is installed correctly. Ask your retailer to connect you to a local Armstrong Flooring Certified Installer. These contractors are exclusively trained to install our products, so you can rest assured that your new floor will not only look great, but will be installed correctly with guaranteed results. Carefully review the detailed instructions for your flooring to learn what you'll need and what to expect.

Do this well in advance. Clear out furniture. Remove and dispose of old flooring if necessary. Gently remove any wall base, millwork or trim that you'd like to reuse. Be sure the floor you're laying over is dry, clean and flat. If repairs are needed, make those before starting the installation. Your list could include adhesive, double-faced flooring tape, a vinyl cutting knife, a lb.

Check your installation instructions for specifics. Most vinyl sheet flooring does not require acclimation.

Simply unrolling it just prior to installation so it can adjust to the environment is sufficient, and also allows the roll to relax and flatten out. Review your installation instructions, because there may be certain circumstances, such as extreme temperatures, when a short period of acclimation is necessary. Read every step of the ones provided with your product. They outline important details and special considerations that might not be obvious, except to an experienced professional, including: subfloor requirements, handling seams, and cutting and fitting methods.

If you or your professional installer has questions before or during installation, contact our Customer Service team. Once your new floors are in place, clear tools and materials from the area. Clean and seal seams according to your instructions, then clean the floor with the recommended cleaner for vinyl floors.

Merci de votre visite! Thanks for visiting us! Where to Start. Inspiration Inspiration. See All Inspiration. Close Inspiration Menu. Samples Find a Store. Inspiration Photo Gallery Design a Room. See All Rigid Core. Close Rigid Core Menu. Luxury Vinyl Tile.

Popular Collections American Personality 12 Vivero. See all Luxury Vinyl Tile. Close Luxury Vinyl Tile Menu. Engineered Tile. Engineered Tile What is Engineered Tile? Popular Collections Alterna. See all engineered tile. We use cookies to make wikiHow great. By using our site, you agree to our cookie policy. Cookie Settings. Learn why people trust wikiHow. Download Article Explore this Article parts. Tips and Warnings. Things You'll Need.

Related Articles. Article Summary. Part 1. Measure and order your vinyl. Use a measuring tape to carefully determine the size of your room. It is imperative that you get accurate measurements, or else you may end up with too little vinyl to finish the job. Remove anything that will be in the way.

Vinyl flooring can be placed in a variety of rooms, so the things you have to remove will vary depending on where you are placing your vinyl. Take out any free-standing furniture, and then move on to appliances. Take out the old flooring. This step is primarily necessary if you have carpet that you are replacing with vinyl; vinyl flooring can cover nearly any floor surface, so long as it is rigid, flat, smooth, and dry.

Pull up the old floor, and remove the threshold strips that trim out the doorways. The next step, although tedious, is very important: work along the subfloor, pulling out or hammering in any and staples and nails that you encounter that are not driven below the floor surface.

Old flooring and floor adhesives may contain asbestos, so call your county for an asbestos test before pulling it or disturbing it. If your county building or environmental office doesn't offer this service, consult a private testing laboratory to find out how to gather samples and have them test them. Make a paper template of the floor. Cut heavy construction paper into large strips, and lay it across your floor. Cut out any corners or built-in obstacles, and add measurements. Do this with multiple pieces of paper, until you've covered your entire floor.

Then, tape all the pieces of paper together to form a full sized copy of the floor. Prepare your underlayer underlayment. For subfloors that require a lot of work to smooth, flatten, or level, installing an underlayment is the easiest way to make this correction.

Tape your paper template of the floor to your underlayer plywood. Use this as a guide, and cut the plywood to fit the flooring in your room. Carefully cut your plywood in sections that match up, checking for fit with each completed piece. Rough-cut the underlayer first, and then make more detailed cuts after fitting each piece. Place your underlayer. Put your underlayer plywood sheets in the room, and leave them for 2 or 3 days. Install the underlayer. You should never use nails or screws in the underlayer, as these will cause bumps in the vinyl flooring.

Work your way across the room, stapling the underlayer to the floor. Finish smoothing the underlayer. Work your way across the floor with a sander, smoothing down any edges that are not flush where they meet, or bumps in the underlayer. Then, use a leveling compound to fill in these spaces and any cracks in the underlayer. This will help to provide a smooth underlayer, which is vital to having a smooth final application of your vinyl. Follow the package directions for applying the floor leveling compound and make sure it is compatible with both the underlayer and the vinyl adhesive you will be using.

Part 2. Decide on the pattern for your vinyl. Vinyl typically comes in 12 inch square tiles, but it may come in sheets. If you have vinyl sheets, all you have to do is cut it out to fit the room, allowing for seams if the room is wider than the sheet. Vinyl tiles, on the other hand, must be applied in a pattern. Determine how you will lay the floor. You may strike a chalk line as a guide to the first row of vinyl if you are using tiles.

Keep in mind that you will always start your pattern in the center of the room and work your way out, in order to keep it symmetrical. Determine the application process for your vinyl. There are two types of vinyl: self-stick, and glue down. Self-stick vinyl is very straight forward, as it comes with an adhesive backing that you use to stick it to the floor. Glue down vinyl takes a bit more work, as it requires you to put a layer of vinyl flooring glue on the underlayer prior to placing your vinyl.

If you have self-stick vinyl, simply follow the directions for application and you are set. If you have unglued vinyl, continue on for instructions on applying it. Mark your pattern on your paper template. To make applying your vinyl easier, you can lay it out and cut it to fit using your paper template. Simply lay the vinyl out on the template, and use it as a pattern for cutting your vinyl to size. Begin gluing the vinyl flooring.

Get your vinyl flooring adhesive out, and get a notched trowel. Start in a corner of the room following your pattern , and scoop out some of the glue onto the trowel. Always have a damp rag at the ready for spills or smears on the vinyl.

Lay the vinyl. For solid vinyl tiles VCT, or vinyl composition tiles , place each one flat, perfectly aligned with the row, and snugly abutting the previous tile.

Do not slide the tiles when laying them, as this will "drag" the adhesive. Press the vinyl down to stick it to the adhesive. Apply pressure as you roll over the tile in order to stick it to the adhesive and the underlayer. Continue applying the vinyl. Work your way across the floor, applying the vinyl according your your pattern.

Lay out some of the glue, allow it to dry until tacky, stick the vinyl, roll over it with your roller, and repeat the process at the next section. Fill the entire floor with the vinyl, until you reach the edges. If you need to cut vinyl to fit the odd edge spaces, do so now. Otherwise, place your cut vinyl into these spaces and roll over them to verify that they are secured.

Finish the flooring. If you installed your vinyl flooring in a bathroom, use a caulk gun to caulk around the edges of the floor where they meet with the baseboards.